English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 75651/75651 (100%)
造訪人次 : 27800041      線上人數 : 80
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋

    子類別

    博碩士論文 [2809/2809]
    期刊論文 [897/897]
    考古題 [328/328]
    研究計畫 [67/67]

    社群統計


    近3年內發表的文件: 0(0.00%)
    含全文筆數: 4101(100.00%)

    文件下載次數統計
    下載大於0次: 3956(96.46%)
    下載大於100次: 3649(88.98%)
    檔案下載總次數: 1986836(5.03%)

    最後更新時間: 2025-06-17 01:43

    上傳排行

    資料載入中.....

    下載排行

    資料載入中.....

    RSS Feed RSS Feed
    跳至:
    或輸入年份:
    由新到舊排序 由最舊的開始

    顯示項目1-50 / 3956. (共80頁)
    1 2 3 4 5 6 7 8 9 10 > >>
    每頁顯示[10|25|50]項目

    日期題名作者
    2022-09-30 冷媒HFC-134a與HFC-245fa在板式熱交換器中之性能比較;Performance evaluation of Refrigerants HFC-134a and HFC-245fa in Plate Heat Exchangers 余沛萱; Yu, Pei-Shiuan
    2022-09-29 1 kW兩相蒸發冷卻系統設計及性能驗證 林煜祥; Lin, Yu-Shiang
    2022-09-29 電化學放電加工藍寶石極間現象觀察與加工技術研究;Observation of Gap Phenomena and Developement Processing Technology for ECDM of Sapphire 余紹華; Yu, Shao-Hua
    2022-09-29 雙螺桿轉子對之泛用齒間間隙計算方法;A General Method on Inter-Lobe Clearance Evaluation for Twin-Screw Rotor Pairs 黃大祐; Huang, Da-You
    2022-09-28 二階行星齒輪傳動機構效率分析 王晨曄; Wang, Chen-Ye
    2022-09-28 以二維熱影像之溫度序列與深度學習預測生物支架線徑之研究;A Research on Predicting Line Width of Bio-Scaffold using Temperature Series on Thermal Imager and Deep Learning 薛廷威; Hsueh, Ting-Wei
    2022-09-28 自動化工作站排程系統之設計與應用;Design of Scheduling System for Automation Workstations and its Applications 朱國睿; ZHU, GUO-RUI
    2022-09-28 矩形平板施加點質量陣列的振動特性與暫態波傳分析與波源歷時反算應用;Vibration Characteristic and Transient Wave Propagation Analysis of Rectangular Plate Attached Mass Points and Application of Inverse Calculation of Impact History 林沛熹; Lin, Pei-Hsi
    2022-09-28 矩形平板部分埋沒於顆粒體之動態反應與振動特性;Dynamic Response and Vibration Characteristics of a Rectangular Plate Partially Buried in Particles 洪聖凱; Hung, Sheng-Kai
    2022-09-28 硫脲及其衍生物添加對微陽極導引電鍍法製備銅微柱之結構及特性影響研究;Influence of thiourea and its derivatives addition on the Structure and Properties of copper micropillars prepared by microanode guided electroplating 賴威全; LAI, WEI-QUAN
    2022-09-28 漸擴雙通式微流道蒸發熱交換器性能研究 許正宏; Hsu, Cheng-Hung
    2022-09-28 鋰離子電池模組之產熱模型建立與熱傳模擬分析;Modeling and Numerical Analysis of Heat Transfer in a Li-ion Battery Pack 鄭竣安; Cheng, Chun-An
    2022-09-26 整合多層液態金屬線圈發電機之研製 張益誠; Zhang, Yi-Cheng
    2022-09-23 精密鑄造中殼模厚度和保溫棉對縮孔影響的預測—以316L不銹鋼流量計之缺陷改善為例;Effect of shell mold thickness and insulating wool pattern on internal porosity in investment casting of vortex flow meter 曾瀚緯; Tseng, Han-Wei
    2022-09-23 熱機處理對六元富鈦中熵合金之微結構與機械性質影響之研究;The effect of thermo-mechanical treatment on the microstructure and mechanical properties of hexamerous titanium-rich medium-entropy alloy 蔡翰林; Tsai, Han-Lin
    2022-09-22 基於石墨烯改質膨脹型阻燃塗料和混能式微奈米發電機的分層可撓性自供電熱感測器;Highly Flexible and Self-Powered Thermal Sensor (FSTS) Based on Integrated Hierarchical Structure of Graphene-Modified Intumescent Flame Retardant (GIFR) Coating with Hybridized Nanogenerator 謝沁嬈; Shie, Chin-Yau
    2022-09-22 電腦輔助平行軸減速齒輪箱之模組化設計與尺寸系列發展;Computer aided modular design and size range development for parallel reduction gearboxes 徐煜翔; Hsu, Yu-Shiang
    2022-09-21 可檢測大電流之磁場感測器設計;DESIGN OF A CMOS-MEMS THREE-AXIS MAGNETIC SENSOR FOR DETECTING LARGE CURRENT 賴允文; Lai, Yun-Wen
    2022-09-20 結合可撓性線圈之磁力計量測與分析 李宥霖; Li, Yu-Lin
    2022-09-19 利用低損傷電漿改質於提升二硫化鉬電晶體之電傳輸特性;Using low-damaged plasma modification to improve the electrical transport properties of MoS2-based transistors 廖恩逸; Liao, En-Yi
    2022-09-16 以微電鍍法製備鎳鉬合金微柱並探討其在1.0 M KOH溶液中電解產氫之性能;Fabrication of Ni-Mo Alloying micropillars by Micro-Anode Guided Electroplating and Their use in 1.0 M KOH to produce Hydrogen gas 程憲威; Cheng, Hsien-Wei
    2022-09-07 超音波振動輔助啄鑽式藍寶石微孔加工之研究;A Study on Ultrasonic Vibration Assisted Micro-hole Pecking Drilling of Sapphire 邱品翰; Chiu, Pin-Han
    2022-09-07 應用均勻實驗設計法優化倒傳遞網路之超參數以預測射出成型成品之比容;Optimizing BPNN hyperparameters via uniform design to predict specific volume of injection molded part 鄧修奇; Teng, Justin H.C.
    2022-09-06 應用二階反應曲面法探討射出成型參數對於ABS試片之體積收縮率最佳化;Applying second order response surface methodology to optimize volumetric shrinkage of ABS specimen through injection molding parameters 林顥耘; Lin, Hao-Yun
    2022-09-01 應用機器學習之堆疊模型於產品瑕疵分類之研究 王宏彬; Wang, Hong-Bin
    2022-09-01 離岸風機基座裂縫的強度與疲勞分析;Strength and Fatigue Analysis of Cracks in the Foundation of an Offshore Wind Turbine 吳春昊; WU, CHUN-HAO
    2022-08-31 使用深度學習及隨機森林預測地震之分析;Earthquake Prediction Using Deep Learning and Random Forest 羅正勛; LO, Cheng-Hsun
    2022-08-31 兼具齒面拓樸修整及磨紋控制之創成磨齒技術開發;Technology Development of Generating Gear Grinding with Considering Both Topology Modification and Grinding Texture Control 楊昀承; Yang, Yun-Cheng
    2022-08-31 高絕緣碳化矽於線放電切割加工之先期研究;Preliminary Study on High Insulation Silicon Carbide in Wire EDM 陳知昊; Chen, Chih-Hao
    2022-08-30 M1.2微型擠壓絲攻製程參數之有限元素分析結果 王志先; Vuong, Chi-Tien
    2022-08-30 不等長微型擠壓絲攻成型加工參數之實驗研究 黃彥程; Huang, Yen-Cheng
    2022-08-30 以機器學習結合排液容器法量測液體密度與黏度 李漢祥; Li, Han-Xiang
    2022-08-30 放電複合超音波輔助電化學加工製備微圓柱形陣列電極之研究;A Study on Fabrication of Micro-Cylindrical Array Electrodes by Electrical Discharge Machining combined with Ultrasonic Assisted Electrochemical Machining 鄭安傑; Jheng, An-Jie
    2022-08-30 啄鑽式電化學放電加工藍寶石基板之研究;Sapphire Substrate Machining by Using Electrochemical Discharge Machining with Peck Drilling 蔡依婷; Tsai, Yi-Ting
    2022-08-30 硬脆材料複合加工與視覺影像定位系統之初步研究 陳崴淇; WeiChi, Chen
    2022-08-30 微型擠壓絲攻應用於316L不鏽鋼攻牙暨製程參數之實驗研究 許永翰; Hsu, Yung-Han
    2022-08-30 運用田口法於光纖收發器之散熱分析 陳彥瑋; Chen, Yan-Wei
    2022-08-30 擾動輔助EMD演算法在穿戴式嵌入式裝置中MCU的即時運算;Real-time computation of disturbance-assisted EMD algorithms in an MCU of wearable embedded system 林昱銓; LIN, Yu-Chuan
    2022-08-30 擾動輔助經驗模態分解之邊界效應的理論與數值分析;A Theoretical and Numerical Study on the Boundary Effects for Disturbance-Assisted EMD Algorithms 鄭詔合; Cheng, Shao-Ho
    2022-08-29 Design of a Spherical Reconfigurable Linkage for the Control of Mechanism Center of Rotation 王玟心; Wang, Wen-Hsin
    2022-08-29 以深度學習結合計算流體力學 量測液體密度、黏度與表面張力係數 蔡惟旭; Cai, Wei-Xu
    2022-08-29 以慣性感測器量化中風病患下肢運動能力暨功能分級之研究 韓紹禮; Han, Shao-Li
    2022-08-29 流體對可侵蝕傾斜床夾帶運移行為之研究 李育誠; Li, Yu-Cheng
    2022-08-29 移動式顆粒床過濾器應用於移除酸性氣體之研究 陳韋豪; Chen, Wei-Hao
    2022-08-26 有尾槳無人共軸直升機懸停系統;Hovering system of Unmanned coaxial helicopter with tail rotor 陳思俊; CHEN, SZU-CHUN
    2022-08-26 鎳鉬鋅合金微柱、微螺旋之製備及其在1M KOH中之產氫行為探討;Preparation of Ni-Mo-Zn Alloy micropillars and Microspirals and Investigation of Their Hydrogen Production Behavior in 1M KOH 黃楚雯; Huang, Chu-Wen
    2022-08-25 以卡爾曼濾波器達成之蛇型機器人狀態監測與行動策略;Snake Robot Motion Strategy with Kalman Filter 王韜; Wang, Tao
    2022-08-25 四軸飛行器搭配機器視覺進行燈泡卸載;Quadcopter With Machine Vision For Bulb Uninstall 沈時雨; Shen, Shih-Yu
    2022-08-25 於ROS架構下應用SLAM之導航機器人開發;Navigation Robot Development by Applying SLAM Based on ROS 蔡承祐; Tsai, Cheng-Yu
    2022-08-25 垂直振動片置入物對儲槽內顆粒排放行為之影 響;The effect of vibrated plate on the discharge behavior in a silo 張凱翔; Chang, Kai-Hsiang

    顯示項目1-50 / 3956. (共80頁)
    1 2 3 4 5 6 7 8 9 10 > >>
    每頁顯示[10|25|50]項目

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明